Configuring Distribution Groups Outlook Voice Access

Configuring Distribution Groups Outlook Voice Access

Forward voicemail to a Distribution Group using the Outlook Voice Access - TechNet Forums http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1943597&SiteID=17

C:\Program Files\Microsoft\Exchange Server\Bin>galgrammargenerator -l -x SpeechGrammarFilterList.xml -o GrammarLog3.txt

On the exchange server call distributionlist.cfg
This file has to be updated with the distribution groups that are in the AD.
There is a kicker
The distribution groups only get into this file if they are
Main Enabled Universal Distribution Groups
They also only get into this file if you run the following command:
C:\Program Files\Microsoft\Exchange Server\Bingalgrammargenerator -l -x speechgrammarfilterlist.xml –logfile1.txt(this creates a log file to see what was put in the List)
The other kicker
the Distribution Groups should be something a Human Can say IE Say ETC-MSFT-SME (the words not the letters)
so groups that do not contain normal speak-able words will most likely be impossible to ask for.

If you want to use this feature in your company you may need to readjust your distro lists to something we can say and not spell.

Hybrid Gateway

The Audiocodes M1K hybrid has a quark with it.

The M1k gateway does not come with any Trunk Cards in it or any FXS or FXO cards in it.

When you get a Card to put in to the gateway there is a sticker on it that says " do not install this card until the gateway has been upgraded to the supporting firmware" now there is no way to see the firmware on the gateway until you turn it on.

 
 

Symptoms: the Gateway will not hold its network connection the Link light on the 2 network ports will not stay linked. You will not be able to connect to the web page on the default IP address 10.1.10.10

 
 

Solution: Plug in the Trunk card into the gateway and it will fix the network interface problem and release the gateway from its recycling and seeking of cards